3M Paint Defender Spray Film, 90001
3m company
Revision date : 2013-07-19
Note: Ingredients listed on restricted chemical lists
EC/CAS
7732-18-5
Name of the chemical
Water, distilled, conductivity or of similar purity H2O
Concentration
N/A
EC/CAS
8052-41-3
Name of the chemical
Stoddard Solvent; Naphtha (petroleum), hydrodesulfurized heavy
Concentration
N/A
EC/CAS
540-97-6
Name of the chemical
D6
Concentration
N/A
EC/CAS
67-56-1
Name of the chemical
Methanol
Concentration
N/A
EC/CAS
55965-84-9
Name of the chemical
Mixture of 5-chloro-2-methyl-2H- isothiazol-3-one (EINECS 247-500-7) and 2-methyl-2H-isothiazol-3-one (EINECS 220-239-6)
Concentration
N/A
General Information
Revision date
2013-07-19
Product name
3M Paint Defender Spray Film, 90001
Substance name
Condition
Product Synonyms
Dimethyl Ether
CAS No.
7732-18-5
Supplier name
Automotive
Manufacturer Name
3M Paint Defender Spray Film, 90001
Icons in SDS
Company Information
Company name
3m company
GHS Information
Signal word
Warning
Section 2
SECTION 2: Hazards identification
29 CFR 1910.1200) The label elements below were prepared in accordance with OSHA Hazard Communication Standard, 29 CFR 1910.1200. This information may be different from the actual product label information for labels regulated by other agencies.
2.1 Classification of the substance or mixture
Flammable Liquid: Category 3. Skin Corrosion/Irritation: Category 2. Skin Sensitizer: Category 1. Reproductive Toxicity: Category 2. Specific Target Organ Toxicity (central nervous system): Category 3.
Signal word
Warning
Hazard pictograms
Flame | Exclamation mark | Health Hazard | 3M™ Synthetic Wax Protectant PN 39030, 39030S, 39037, 39056 01/29/14
Hazard statements
Flammable liquid and vapor. Causes skin irritation. May cause an allergic skin reaction. May cause drowsiness or dizziness. Suspected of damaging fertility or the unborn child.
Precautionary statements
General: Keep out of reach of children. If medical advice is needed, have product container or label at hand.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Ground/bond container and receiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Keep container tightly closed. Use explosion-proof electrical/ventilating/lighting equipment. Avoid breathing dust/fume/gas/mist/vapors/spray. Use only outdoors or in a well-ventilated area. Wear protective gloves and eye/face protection. Wash thoroughly after handling. Contaminated work clothing must not be allowed out of the workplace.
Response
IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse. Call a POISON CENTER or doctor/physician if you feel unwell. In case of fire: Use a fire fighting agent suitable for flammable liquids and solids such as dry chemical or carbon dioxide to extinguish.
Storage
Store in a well-ventilated place. Keep container tightly closed. Keep cool. Store locked up.
Disposal
Dispose of contents/container in accordance with applicable local/regional/national/international regulations. Notes to Physician: Not applicable 3M™ Synthetic Wax Protectant PN 39030, 39030S, 39037, 39056 01/29/14
2.3 Other hazards
None.
