3M Scotch-Seal 560 Polyurethane Adhesive Sealant, Black, Grey or White

3m company

Revision date : 2021-08-07


GHS07 GHS08
Health risk rating 5
Safety risk rating 3
Environmental risk rating 3

Note: Ingredients listed on restricted chemical lists

EC/CAS

202-966-0/101-68-8

Name of the chemical

4,4’-Methylenediphenyl diisocyanate

Concentration

<=0.3

EC/CAS

215-535-7/1330-20-7

Name of the chemical

Xylene

Concentration

1-5

Listed in

EC/CAS

202-849-4/100-41-4

Name of the chemical

Ethylbenzene

Concentration

< 2

Listed in

EC/CAS

215-138-9/1305-78-8

Name of the chemical

Calcium oxide

Concentration

<0.3

Listed in

EC/CAS

236-675-5/13463-67-7

Name of the chemical

Titanium dioxide

Concentration

2119457014-47

General Information

Revision date

2021-08-07

Product name

3M Scotch-Seal 560 Polyurethane Adhesive Sealant, Black, Grey or White

Icons in SDS

GHS08

Company Information

Company name

3m company

E-mail address of the competent person responsible for the Safety Data Sheet

tox.uk@mmm.com

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H317, H319, H334, H412

Hazard statements

Code

Statements

H317

May cause an allergic skin reaction

H319

Causes serious eye irritation

H334

May cause allergy or asthma symptoms or breathing difficulties if inhaled

H412

Harmful to aquatic life with long lasting effects

Precautionary statements

Code

Statements

P280

Wear protective gloves/protective clothing/eye protection/face protection.

P304+P340

IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P342+P311

IF experiencing respiratory symptoms: Call a POISON CENTER/doctor/...

EUH-statements

Code

Statements

EUH204

Contains isocyanates. May produce an allergic reaction.

EUH212

Warning! Hazardous respirable dust may be formed when used. Do not breathe dust.

Section 2

2.1 Classification of the substance or mixture

CLP REGULATION (EC) No 1272/2008 The health and environmental classifications of this material have been derived using the calculation method, except in cases where test data are available or the physical form impacts classification. Classification(s) based on test data or physical form are noted below, if applicable. The carcinogenicity classification for titanium dioxide is not applicable based on physical form (material is not a powder). Respiratory Sensitization, Category 1 - Resp. Sens. 1; H334 Skin Sensitization, Category 1A - Skin Sens. 1A; H317 Hazardous to the Aquatic Environment (Chronic), Category 3 - Aquatic Chronic 3; H412 For full text of H phrases, see Section 16.

2.2 Label elements

CLP REGULATION (EC) No 1272/2008

Hazard pictograms

GHS08 (Health Hazard) | Ingredients: Ingredient CAS Nbr EC No. % by Wt 4,4'-methylenediphenyl diisocyanate 101-68-8 202-966-0 <= 0.3 Reaction mass of Bis(1,2,2,6,6-pentamethyl-4- 915-687-0 0.01 - 0.11 piperidyl) sebacate and Methyl 1,2,2,6,6-pentamethyl- 4-piperidyl sebacate

Hazard statements

H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H317 May cause an allergic skin reaction. H412 Harmful to aquatic life with long lasting effects.

Prevention

P261B Avoid breathing dust. P280E Wear protective gloves. P261B Avoid breathing dust. P280E Wear protective gloves.

Response

P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P342 + P311 If experiencing respiratory symptoms: Call a POISON CENTRE or doctor/physician. For containers not exceeding 125 ml the following Hazard and Precautionary statements may be used: <=125 ml Hazard statements H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H317 May cause an allergic skin reaction. H412 Harmful to aquatic life with long lasting effects. <=125 ml Precautionary statements P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P342 + P311 If experiencing respiratory symptoms: Call a POISON CENTRE or doctor/physician.

Supplemental label elements

EUH204 Contains isocyanates. May produce an allergic reaction. EUH212 Warning! Hazardous respirable dust may be formed when used. Do not breathe dust. 2% of the mixture consists of components of unknown acute dermal toxicity.

Contains

2% of components with unknown hazards to the aquatic environment Information required per Regulation (EU) 2020/1149 as regards diisocyanates: As from 24 August 2023 adequate training is required before industrial or professional use. Notes on labelling H319 not applied based on test data.

2.3 Other hazards

Persons previously sensitised to isocyanates may develop a cross-sensitisation reaction to other isocyanates.

Ready to get started with your SDS library?
You can be up and running in minutes with our 30 day free trial.