Scotch-Weld(tm) Epoxy Structural Adhesive 7271 B/A : Part B
3m company
Revision date : 2020-08-26
Note: Ingredients listed on restricted chemical lists
EC/CAS
25068-38-6
Name of the chemical
4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane
Concentration
N/A
EC/CAS
15625-89-5
Name of the chemical
2-ethyl-2-[[(1-oxoallyl)oxy]methyl]-1,3-propanediyl diacrylate; 2,2-bis(acryloyloxymethyl)butyl acrylate; trimethylolpropane triacrylate
Concentration
N/A
EC/CAS
7631-86-9
Name of the chemical
Silver adsorbed on silicon dioxide
Concentration
N/A
General Information
Revision date
2020-08-26
Product name
Scotch-Weld(tm) Epoxy Structural Adhesive 7271 B/A : Part B
Emergency telephone
+44 (0)1344 858 000
Icons in SDS
Company Information
Company name
3m company
E-mail address of the competent person responsible for the Safety Data Sheet
tox.uk@mmm.com
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H400, H410
Hazard statements
Code
Statements
H315
Causes skin irritation
H317
May cause an allergic skin reaction
H319
Causes serious eye irritation
H400
Very toxic to aquatic life
H410
Very toxic to aquatic life with long lasting effects
Precautionary statements
Code
Statements
P273
Avoid release to the environment.
P280
Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.
P333+P313
IF SKIN irritation or rash occurs: Get medical advice/attention.
P501
Dispose of contents/container to ...
Section 2
2.1 Classification of the substance or mixture
CLP REGULATION (EC) No 1272/2008 The health and environmental classifications of this material have been derived using the calculation method, except in cases where test data are available or the physical form impacts classification. Classification(s) based on test data or physical form are noted below, if applicable. Serious Eye Damage/Eye Irritation, Category 2 - Eye Irrit. 2; H319 Skin Corrosion/Irritation, Category 2 - Skin Irrit. 2; H315 Skin Sensitization, Category 1 - Skin Sens. 1; H317 Hazardous to the Aquatic Environment (Acute), Category 1 - Aquatic Acute 1; H400 Hazardous to the Aquatic Environment (Chronic), Category 1 - Aquatic Chronic 1; H410 For full text of H phrases, see Section 16.
2.2 Label elements
CLP REGULATION (EC) No 1272/2008
Signal word
WARNING.
Hazard pictograms
GHS07 (Exclamation mark) |GHS09 (Environment) | Ingredients: Ingredient CAS Nbr EC No. % by Wt reaction product: bisphenol-A-(epichlorhydrin) 25068-38-6 500-033-5 10 - 50 Phenol-formaldehyde polymer, glycidyl ether 28064-14-4 10 - 50 2,2-bis(acryloyloxymethyl)butyl acrylate 15625-89-5 239-701-3 25 - 35
Hazard statements
H319 Causes serious eye irritation. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H410 Very toxic to aquatic life with long lasting effects.
Prevention
P280E Wear protective gloves. P273 Avoid release to the environment. P280E Wear protective gloves.
Response
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. 11% of the mixture consists of components of unknown acute oral toxicity.
Disposal
P501 Dispose of contents/container in accordance with applicable local/regional/national/international regulations. For containers not exceeding 125 ml the following Hazard and Precautionary statements may be used: <=125 ml Hazard statements H317 May cause an allergic skin reaction. <=125 ml Precautionary statements
Contains
63% of components with unknown hazards to the aquatic environment
2.3 Other hazards
None known.
