P-304S-CN-10X

AccuStandard, Inc

GHS02GHS07GHS08
Health risk rating5
Safety risk rating3
Environmental risk rating1

General Information

Product name

P-304S-CN-10X

Supplier name

AccuStandard, Inc

Emergency telephone

AccuStandard, Inc

Icons in PDF

GHS02GHS07GHS08

Company Information

Company name

AccuStandard, Inc

E-mail address of the competent person responsible for the Safety Data Sheet

edocs@accustandard.com

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements(CLP)

H225, H315, H319, H332, H350

Hazard statements

Code

Statements

H225

Highly Flammable liquid and vapour

H315

Causes skin irritation

H319

Causes serious eye irritation

H332

Harmful if inhaled

H350

May cause cancer

Precautionary statements

Code

Statements

P202

Do not handle until all safety precautions have been read and understood.

P233

Keep container tightly closed.

P260

Do not breathe dust/fume/gas/mist/vapors/spray.

P262

Do not get in eyes, on skin, or on clothing.

P264

Wash ... thoroughly after handling.

P284

[In case of inadequate ventilation] Wear respiratory protection.

P338

Remove contact lenses, if present and easy to do. Continue rinsing.

P340

Remove victim to fresh air and keep at rest in a position comfortable for breathing.

P352

Wash with plenty of water/...

P404

Store in a closed container.

Section2

SECTION 2: Hazards identification

2.2 Label elements

3 * 2 HEALTH 2 0 3 FLAMMABILITY - continued P264 - Wash thoroughly after handling. Do not take internally. Eye wash and safety equipment should be readily available. P284 - Respiratory Protection: If workplace exposure limit(s) of product or any component is exceeded (see TLV/PEL), or a risk assessment shows air-purifying respirators are appropriate, use of a NIOSH/MSHA approved air supplied respirator is advised. Use a full-face respirator with multi-purpose combination (US) or type ABEK (EN14387) respirator cartridges in absence of proper environmental control. Always use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Engineering and/or administrative controls should be implemented to reduce exposure. P338 - Eye contact: Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. P340 - Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. P352 - Skin contact: Wash thoroughly with soap and water. Get medical attention if irritation develops or persists.

Signal word

Danger 0

Hazard statements

H225 - Highly Flammable (Flammable liquids, category 2) H315 - Irritating to skin. (Skin corrosion/irritation, category 2) H319 - Causes severe eye irritation. (Eye damage/irritation, category 2A) H332 - Harmful if inhaled. (Acute toxicity, inhalation, category 4) H350

2.3 Other hazards

2.2.1 - Symptom of Exposure Health/Environment Highly Flammable (Flammable liquids, category 2) Breathing high vapor concentrations may cause cyanide poisoning. Effects may be delayed. Overexposure may cause headache, breathing difficulty, irritation of eyes and throat, central nervous system disturbances and unconsciousness.

Potential health effects

Causes severe eye irritation. (Eye damage/irritation, category 2A) Irritating to skin. (Skin corrosion/irritation, category 2) May be harmful if absorbed through the skin. (Acute toxicity, dermal, category 5) Irritating to mucous membrane and upper respiratory system. Harmful if inhaled. (Acute toxicity, inhalation, category 4) May be harmful if swallowed. (Acute toxicity, oral, category 5) 2.2.3 - Routes of Entry Inhalation, ingestion or skin contact. 2.2.4 - Carcinogenicity

Ready to get started with your SDS library?
You can be up and running in minutes with our 30 day free trial.